MotiveCrate Guides
BMW 3 Series Windshield Washer Nozzle 8iME36E90E60 Replacement Guide
BMW 3 Series Windshield Washer Nozzle 8iME36E90E60 Replacement Guide - BMW 3 Series washer nozzle 8iME36E90E60: E90 fitment, how to tell if your nozzle is heated, symptoms and installation steps. | MotiveCrate
September 21, 2026 · 3 min read · By MotiveCrate
Part number 8iME36E90E60 is a windshield washer nozzle used on BMW 3 Series models, notably the E90 generation. BMW washer nozzles are more model-specific than most brands — the hood and cowl geometry changes between generations, and the nozzle housing angle is set accordingly. This guide covers what it fits, how to confirm the part, the heated-nozzle question, and how to install it.
What 8iME36E90E60 is
A hood-mounted windshield washer nozzle for BMW 3 Series applications. Depending on the vehicle's options, the equivalent nozzle may be heated — if your original nozzle has an electrical connector in addition to the hose, you need the heated variant.
| Attribute | Detail |
|---|---|
| Type | Windshield washer nozzle |
| Mounting | Hood clip-in |
| Hose fitting | Push-on barb |
| Heated option | Possibly — check your original for a wire |
| Check valve included | No |
What it fits
| Model | Notes |
|---|---|
| BMW 3 Series | E90 generation and related applications — verify chassis code and year |
Chassis code matters. BMW changes part numbers between generations even when the model name stays the same. Confirm your chassis code (e.g. E90, E91, E92, E93) against your original part number before ordering.
First: is your nozzle heated?
This is the most common ordering mistake on BMW washer nozzles.
| What you see on the old nozzle | What to order |
|---|---|
| Hose only | Standard (non-heated) nozzle |
| Hose plus a two-wire connector | Heated nozzle — must match |
| A spray bar along the wiper arm | Wiper-arm assembly, not a hood nozzle |
Fitting a non-heated nozzle where a heated one belongs means no spray in freezing conditions and possibly a warning on the dash.
Symptoms and what they mean
| Symptom | Likely cause |
|---|---|
| Nothing sprays, pump audible | Nozzle or hose |
| Spray arrives late, then bursts | Check valve, not the nozzle |
| Weak spray, worsening | Clogged nozzle — see 7 causes |
| Sprays but misses the glass | Wrong part number (angle mismatch) |
| Only one side | That side's hose or nozzle |
| No pump sound at all | Fuse or pump — check first |
Installation
Tools: small flat screwdriver, replacement nozzle, washer fluid.
- Open the hood and locate the nozzle on the hood or the cowl.
- If heated, unclip the electrical connector before removing the nozzle.
- Release the retaining tab with the screwdriver while lifting the nozzle.
- Pull the hose off gently — BMW hose gets brittle with age.
- Match the numbers before fitting the new part.
- Reconnect hose, then the wire (heated models). Order matters less than seating both fully.
- Test and adjust the aim.
Do not use compressed air on an installed nozzle. It can blow the hose off its fitting inside the fender.
Related parts to check
- Check valve — if spray is delayed rather than absent
- Washer hose — a universal kit covers most jobs
- Reservoir cap — a cracked cap feeds debris that clogs nozzles
Frequently asked questions
What does 8iME36E90E60 fit?
A BMW 3 Series windshield washer nozzle, primarily E90-generation applications. Always confirm your chassis code and model year against the number on your original nozzle.
Is 8iME36E90E60 heated?
It depends on the vehicle's specification. Look for a two-wire connector on your original nozzle — if present, order the heated variant.
Why is my BMW washer nozzle so expensive compared to other brands?
BMW nozzles are more model-specific and often include heating elements, which raises cost. Where an exact OEM number is available it remains the reliable choice; universal nozzles rarely match BMW hood geometry well.
Why does my new nozzle spray in the wrong direction?
The housing angle is wrong for your chassis. BMW nozzles look similar across generations but aim differently. Confirm the part number rather than bending anything.
Can I clean the nozzle instead of replacing it?
Yes if the housing is intact — soak in warm water with white vinegar and clear with a fine pin. Replace it if cracked or if the aim cannot be corrected.
Should I replace both BMW nozzles together?
They fail independently. Replacing the pair is optional but often cheaper overall once shipping is counted.
Do you supply these in bulk?
Yes — distributors, repair shops, online retailers and private-label brands across the US, Canada and Mexico. See wholesale and bulk orders.
Related guides
- Windshield Washer Nozzle Buying Guide
- Washer Nozzle Cross-Reference by Brand
- Clogged Washer Nozzle: 7 Causes
- Toyota Washer Nozzle 85381-12300
- All windshield washer nozzles
MotiveCrate supplies aftermarket auto wear parts — oil drain plugs, gaskets, windshield washer nozzles, trim clips and fasteners — for vehicles across the United States, Canada and Mexico. Verify the OEM part number and chassis code before ordering. We do not sell safety-critical components such as braking, steering, suspension, airbag or seat-safety parts.
Need help matching a part?
Email service@motivecrate.com or message us on WhatsApp with your year, make, model and trim and we will confirm the part number for you.
MotiveCrate supplies aftermarket replacement parts and is not affiliated with any vehicle manufacturer. Fitment information is a compatibility guide — always verify the part number before ordering.
