MotiveCrate Guides

85044-60060 Headlight Washer Nozzle: Toyota Land Cruiser 100 & Lexus LX470 Guide

85044-60060 headlight washer nozzle fitment, symptoms and replacement guide for Toyota Land Cruiser 100 Series and Lexus LX470. Verify the part number before ordering.

Published October 2, 2026 · Updated October 2, 2026 · 7 min read · Reviewed by MotiveCrate

85044-60060 headlight washer nozzle Toyota Land Cruiser 100 and Lexus LX470 guide cover – MotiveCrate

Short answer: 85044-60060 is a headlight washer nozzle listed for Toyota Land Cruiser 100 Series and Lexus LX470 applications from 1998–2007. Before ordering, compare the part number moulded or printed on the original nozzle, confirm the model year and inspect the hose connection and mounting tab.

What 85044-60060 does

The headlight washer nozzle directs pressurised washer fluid onto the headlight lens. It is separate from the windshield washer nozzle, although both systems may share a reservoir and pump. A cracked nozzle body, blocked spray slot or loose hose can make one side stop spraying while the windshield washers continue to work.

Listed fitment

ReferenceListed applicationWhat to confirm
85044-60060Toyota Land Cruiser 100 Series / Lexus LX470Model year, original part number, nozzle side and hose connector
1998–2007Listed fitment rangeMarket, model code and headlight washer configuration

Do not order by vehicle name alone. Headlight washer systems can differ by market, trim and front bumper design. Match the original part number and compare the nozzle angle, mounting clips and hose fitting.

Common symptoms

  • One headlight washer sprays weakly or not at all.
  • Washer fluid leaks near the front bumper after the pump runs.
  • The nozzle sprays in the wrong direction or produces a broken stream.
  • The windshield washers work, but the headlight washer does not.
  • A cracked plastic housing or loose retaining tab is visible.

If both windshield and headlight washers stop together, check fluid level, the shared pump, fuse and hose routing first. A single failed headlight nozzle usually points to that nozzle or its short hose connection.

How to confirm the correct part

  1. Clean the old nozzle and look for the original part number.
  2. Confirm the vehicle is a Land Cruiser 100 Series or LX470 and verify the model year.
  3. Photograph the nozzle from the front, side and hose connection.
  4. Compare the mounting tab, spray angle and connector with the replacement.
  5. Check whether the left and right sides use the same service part.

If the number is unreadable, send your model year, market, front bumper photo and the location of the nozzle to service@motivecrate.com or WhatsApp +1 279-200-4690.

Replacement steps

  1. Disconnect the washer hose carefully and keep the connector clean.
  2. Release the retaining tab without forcing the bumper or headlight trim.
  3. Compare the old and new nozzle before installation.
  4. Seat the new nozzle by hand and confirm the tab engages.
  5. Reconnect the hose and test the spray direction.

If spray is delayed or weak after replacement, inspect the hose for a kink, leak or failed check valve. Do not enlarge the mounting opening or force a nozzle into place.

Related MotiveCrate parts

Frequently asked questions

Is 85044-60060 a windshield or headlight washer nozzle?

It is listed as a headlight washer nozzle for the applications above. Confirm the location on your vehicle and the original part number before ordering.

Will it fit every Land Cruiser 100 or LX470?

No. Fitment can vary by year, market and headlight washer configuration. Verify the model year and original number.

Can I replace only one side?

Yes, if only one nozzle is damaged. Replacing both sides may be practical when both original nozzles are aged or brittle.

Why is my new nozzle leaking?

Check that the hose is fully seated, the connector is not cracked and the retaining tab is engaged. A damaged hose or check valve can also cause leaks or weak spray.

Can I buy 85044-60060 in bulk?

Yes. MotiveCrate supplies repair shops, resellers and online sellers with bulk packs, mixed cartons and private-label packaging. Send your quantities and delivery country for a wholesale quote.

Wholesale supply

Need multiple part numbers in one shipment? Visit our Wholesale & Bulk Orders page or send your part list to service@motivecrate.com.

Fitment information is a compatibility reference only. MotiveCrate supplies aftermarket replacement parts and is not affiliated with or endorsed by Toyota or Lexus. Verify the exact part number and model year before ordering.

Parts mentioned in this guide

Replacement options matched to the part type and vehicle applications in this article.

Need help matching a part?

Email service@motivecrate.com or message us on WhatsApp with your year, make, model and trim and we will confirm the part number for you.

MotiveCrate supplies aftermarket replacement parts and is not affiliated with any vehicle manufacturer. Fitment information is a compatibility guide — always verify the part number before ordering.

More guides