MotiveCrate Guides

Screw Clips, Bolt Clips & U-Nut Guide

Screw clips, spring clips and U-nuts secure interior and exterior panels. Learn how to match thread size, panel thickness, clip type and mounting direction.

September 27, 2026 · 6 min read · By MotiveCrate

Screw Clips, Bolt Clips & U-Nut Guide — MotiveCrate guide cover

Screw clips and U-nuts are defined by thread, panel thickness and locking style. A clip that looks similar can use a different screw size or grip range. Match the original part number and measure the panel before ordering.


Common types

  • U-nut or spring nut
  • Speed nut
  • Plastic screw grommet
  • Spring steel clip
  • Captured screw and clip assembly

What to measure

  1. Thread size and pitch
  2. Panel thickness or grip range
  3. Clip length and width
  4. Screw length and head type
  5. Mounting direction and access
  6. Material and corrosion protection

Reference MotiveCrate parts

Browse the full Screw & Bolt Clips collection.

Installation

Confirm the clip is seated on the panel, start the screw by hand and tighten without crushing the plastic. If the clip spins, stop and check the thread and grip range.

FAQ

Can I use a U-nut without the correct screw?

No. Thread size and pitch must match.

Why does the screw keep spinning?

The clip may be stripped, the panel too thin or the thread size incorrect.

Do you supply wholesale quantities?

Yes. Contact service@motivecrate.com or WhatsApp.


Aftermarket compatibility guide. Verify thread size, grip range and original part number.

Need help matching a part?

Email service@motivecrate.com or message us on WhatsApp with your year, make, model and trim and we will confirm the part number for you.

MotiveCrate supplies aftermarket replacement parts and is not affiliated with any vehicle manufacturer. Fitment information is a compatibility guide — always verify the part number before ordering.

More guides