MotiveCrate Guides
Fender Liner & Wheel Arch Clips: Fitment and Replacement Guide
Fender liner and wheel arch clips secure liners, splash shields and edge trim. Learn how to match the retainer by OEM number, stem length, head shape and mounting slot.
September 27, 2026 · 6 min read · By MotiveCrate
Fender liner clips hold plastic liners, splash shields and wheel-arch trim away from the tire. A missing clip can let the liner rub, sag or collect road debris. Match the original retainer by part number whenever possible; if the number is gone, compare head type, stem length and slot size.
Where these clips are used
- Fender liner and inner splash shield
- Wheel-arch edge trim
- Underbody panels near the tire
- Bumper-to-fender edge attachments
- Mud guard and lower trim points
What to verify
- Part number — the most reliable match.
- Head type — round, wide-head, push-in or spring clip.
- Stem length — must lock without crushing the liner.
- Barb design — controls pull-out resistance.
- Hole or slot size — measure the body panel opening.
- Material — nylon, ABS or spring steel.
Reference MotiveCrate clips
- 8R0-853-585 Audi wheel arch spring clip
- 3A0-853-575 VW / Audi underbody and wheel arch clip
- 6506132-AA Chrysler / Jeep / Dodge fender liner clip
- 6504521 Chrysler / Dodge fender and wheel arch clip
- Universal fender and wheel arch clip reference
- Fender and wheel arch clip - universal reference
Browse the full Fender & Wheel Arch Clips collection.
Installation
Lift and support the vehicle safely. Remove the old clip without pulling the liner through the wheel opening. Clean the slot, test-fit the new clip and press it straight in. Recheck clearance between the liner and tire before driving.
Common mistakes
- Using a short clip that allows the liner to move.
- Forcing a clip into a damaged slot.
- Replacing a broken clip without checking nearby fasteners.
- Leaving the liner loose enough to contact the tire.
FAQ
Can I drive with a missing fender liner clip?
Only for a short distance if the liner is still secure. A loose liner can rub the tire or be damaged further.
Are fender liner clips universal?
No. The stem, head and slot size must match the vehicle and panel.
Do you offer wholesale quantities?
Yes. Contact service@motivecrate.com or WhatsApp.
Aftermarket compatibility guide. Verify the original part number before ordering.
Parts mentioned in this guide
Replacement options matched to the part type and vehicle applications in this article.
Need help matching a part?
Email service@motivecrate.com or message us on WhatsApp with your year, make, model and trim and we will confirm the part number for you.
MotiveCrate supplies aftermarket replacement parts and is not affiliated with any vehicle manufacturer. Fitment information is a compatibility guide — always verify the part number before ordering.
